Yeti Owners Club banner

1 - 5 of 5 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter #1 (Edited)
I have had a bit of an accident reversing out of my nightmare driveway in the dark and caught the corner of my bumper on a raised bed edged with huge granite blocks. Bumper bent but not cracked and fog light/headlight surround bent.

I have an engineer friend doing a repair for me but one of the light connectors has come loose.

My friend is asking if anyone has a photo of the back of the headlight cluster and the fog light cluster please. He needs to reconnect the loose cable without removing the bumper.

Can anyone help please? He couldn't find anything Googling.
 

·
Premium Member
Joined
·
5,813 Posts
I take it that will be for a Face Lift Yeti then? Only mention because that means I can’t help.
(Not prejudiced. Just don’t have one to photograph). :)
 
  • Like
Reactions: Angela A

·
Registered
Joined
·
905 Posts
Face lift model? The foglamp is accessed by removing the louvred panel above it. There are some directions in the manual in the bulb changing section.
 
  • Like
Reactions: Angela A

·
Registered
Joined
·
32 Posts
Discussion Starter #4
Yes it's a 2015 so FL version. Thank you 😊
 

·
Premium Member
Joined
·
5,226 Posts
The bumper should not need removal just to reconnect things.
Headlight connectors are accessed below the bonnet slam panel once the bonnet is opened, and the fog lights can be unclipped from the outside of the bumper. Both are shown in the handbook
 
  • Like
Reactions: Angela A
1 - 5 of 5 Posts
Top