Yeti Owners Club banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Could any one please tell me what to expect from this (OFF ROAD BUTTON).
On my car Elegance 170 the roll back works all the time not just when
the (off road engaged).also if i rev the engine when stopped /
parkedit limits to 2500 rpm start the car rolling then can rev to red
line this is also without the (off road engaged)

When engaged (off Road button) light on dash lit and revs limited to
2500 but when rolling can rev as much as i wantI thought it limited
the revs to 2500 all the time off road is swiched on

Pleasecould some one out there tell me the correct operationthat I should expect from this feature

The down hill decent part works when the off road is swiched on.

Thanks and confused
 

·
Premium Member
Joined
·
5,226 Posts
There is a very good but quite long section in the Handbook about it's use and how it helps. Have you read that?

However,
Uphill Start Assist, will limit revs to 2500. (whilst on the slope)
Downhill Assist, maintains a slow stable speed downhill, in neutral, 1st, 2nd, 3rd and reverse
ABS Off-Road, active to 30mph
ASR Off-Road, improves acceleration off-road by limitting slippage
EDL Off-Road, maintains permanent traction in various ways.

All Elegance models have Hill Hold Control which is nothing to do with the O-R button.
Rev limiting to 2500 when standing still is common across all diesels.
 

·
Registered
Joined
·
90 Posts
have you used it on slippy ground ie a wet ploughed field if not take 4x4 yeti on the ground and feel the handling then stop and activate the off road button the difference is staggering depending on the badness of ground.
how long does your heater take to get warm mine takes for ever about 5 miles
 
1 - 3 of 3 Posts
Top